markxr7's blog

i have a sunbird scooter i bought used and when i turn on key switch it runs at full speed (wiich is pretty fast lol) it has a and b on key switch. At this time when i turn it to (a) it is off. when i turn it to (off) it goes half speed. When i turn it to (b) it runs full speed. anybody have a schematic for the wiring? I also replaced the the controller and throttle. if i bypass key switch still same problem. I need help please.

I have an xb 600 with 5 18Ah batts. (New) and only get 15 miles. What gives. Its supose to get 20- 25 stock wit 4 12v 12Ah batts. Any answers or options Mark

When I turn the key to on my back wheele spins and the throttle has no responce. Is it the controller or throttle

I have a 07 cougar xr7 48v 600w scooter. 22mph. I add 1 battery and Bam 29mph. Now I bought a 800w 60v controller will it hook up. The wires on the new controler are thinner does that matter and more of them. Do I need a 60v charger after the change. How do I know what wires go where. I need help please markxr7

My scooter is a 48volt 600w scooter with cruis control and I want to disconect it due to I think its dangerouse. anyone know how to do this and where it conects up at? Also I'm looking for pedals and cranks for it. anybody want to sell them E mail me at( silver fl 39 @ yahoo . com ) Mark

My scooter is a 48volt 600w scooter with cruis control and I want to disconect it due to I think its dangerouse. anyone know how to do this and where it conects up at? Also I'm looking for pedals and cranks for it. anybody want to sell them E mail me at( silver fl 39 @ yahoo . com ) Mark

My scooter is a 48volt 600w scooter with cruis control and I want to disconect it due to I think its dangerouse. anyone know how to do this and where it conects up at? Also I'm looking for pedals and cranks for it. anybody want to sell them E mail me at( silver fl 39 @ yahoo . com ) Mark

WANTED: Peddles and peddle arms for electric scooter E-mail SILVERFL39@YAHOO.COM What does 408 mean? And has anybody added 2 more batteries to a 48volt system without any other mods for a total of 72volts? My controller says 600wats can it handle it? My batts. are 4 12volt 12 amphr. Or should I add 2 12volt 7amphr batts? Please help

I have a 48v scooter that has 600w on the controller. What does that make the brushless hub motor? My batteries are 12v 12amp tab connectors. Are 14 and 20 ampers bolt conect only? I added another 12v 12amp batt.4 a total of 5 batts. How can I get more speed without doing any damage.