Change controllor 36 volt for a 48 volt

1 reply [Last post]
bra
Offline
Joined: 08/24/2009
Points: 3

I would change my controller on my bl36
for a 48 volt controller what brand controller I can put
tanks for help.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
dogman
dogman's picture
Offline
Joined: 04/29/2008
Points: 830
Re: Change controllor 36 volt for a 48 volt

A few have had 36v WE controllers blow, particularly when using 48v lithium. But a great many people run BL 36 controllers at 48v. Should have 63v caps in it. I run 48v nicad on one, with no problems so far. The typical 48v controller will have pretty much the same stuff in it, like 63v caps, but a 48v specific one may have a highe low voltage cutoff.

__________________

Be the pack leader.
36 volt sla schwinn beach cruiser
36 volt lifepo4 mongoose mtb
24 volt sla + nicad EV Global

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
Build Your Own Electric Vehicle You need this book if you want to build your own EV
Customize This