Vectrix Collaborative Handbook

A book chapter to collect pages related to wheels, tires, brakes and suspension of the Vectrix VX-1.

How to change tires on a Vectrix.

How to replace break pads on a Vectrix.

How to adjust the suspension on a Vectrix.

Much info is already on VisforVoltage, if you have a bit of time you may want to help by concentrationg it into the appropriate section of the Handbook.

It's finally working....

Fast or slow and quieter, during parking, plugged in or riding!

Schematic might follow one day - when I've got time.

Here are some pictures of the inside of a Vectrix VX-1 charger (Thanks to The Laird!):

(Click to enlarge)

For anything to do with the motor of the VX-1.

Maintenance, repair, etc.

The Vectux Manual Battery Management System (M-BMS) is a handy device.

I do not recommend to build one, though!

Much more details about the entire M-BMS, for the Rotary switch Array and about how it was developed can be found on Endless Sphere: http://endless-sphere.com/forums/viewtopic.php?f=14&t=6853

Anything related to the Vectrix VX1 lights, brake light, rear light, indicators can be collected and discussed in this chapter.

To save time, I just copy here what I wrote on Endless Sphere a while ago:
(See: https://www.endless-sphere.com/forums/viewtopic.php?f=10&t=10068&start=0 for details and much extra information!)

A “Recharge after BALPOR” is the charging event following a Battery Low Point Reset (BALPOR). I made up these terms due to the complete lack of explanation in the official manual. I feel there is a need to give these worrisome and recurrent events some sort of name which makes them more recognizable.
You can search VisforVoltage for numerous previous discussion of these terms and events.

A chapter to collect and discuss information about the charger of the VX-1.

.

.

Here is a description of the standby-power-consumption problem: http://visforvoltage.org/forum/2547-vectrix-reports#comment-12252 of the charger.

.

.
This post http://visforvoltage.org/forum/2547-vectrix-reports#comment-13640 has a description of the charging stages with early-2008 firmware.

To collect and discuss information about the various fans and impellers keeping the VX-1 cool.