Electric vehicle motors (DC motors, AC motors, hub motors, etc)

Topic / Topic starter Repliessort descending Last post
Normal topic Required vs Available Torque spreadsheet
by jdh2550_1 » Tue, 10/16/2007 - 17:45
3
by echuckj5
Tue, 10/16/2007 - 19:56
Normal topic Etek back!?
by andrew » Tue, 02/06/2007 - 15:56
3
by NickF23
Fri, 05/25/2007 - 12:38
Normal topic Questions on Sepex motor theory
by Ampy » Sat, 04/19/2014 - 12:17
3
by MEroller
Sun, 04/20/2014 - 12:04
Normal topic Mounting template for Mars ME0709
by flashs » Fri, 07/16/2010 - 14:25
3
by reikiman
Sat, 07/17/2010 - 08:09
Normal topic Brushless Motors 10-20KW and 40N.m. max Torque
by FastForward » Mon, 06/23/2008 - 17:32
3
by LinkOfHyrule
Tue, 06/24/2008 - 13:19
Normal topic Etek-R Report-- "Deep Cycle" Testing and Review
by Jeffkay » Fri, 04/18/2008 - 22:27
3
by Jeffkay
Sat, 04/19/2008 - 12:11
Normal topic Speed vs. Torque
by jdh2550_1 » Sun, 09/21/2008 - 10:16
3
by jdh2550_1
Sun, 09/21/2008 - 11:14
Normal topic eGo rewind
by Ray_T » Wed, 06/18/2008 - 15:35
3
by TT
Sun, 02/14/2010 - 00:56
Normal topic Brushed or Bushless
by wavedog » Mon, 09/29/2008 - 20:05
3
by wavedog
Tue, 09/30/2008 - 08:26
Normal topic How does a brush DC motor stop?
by noobster » Thu, 10/16/2008 - 03:46
3
by spinningmagnets
Thu, 10/16/2008 - 20:34
Normal topic Etek sprocket for 415 chain?
by cmdrscampers » Tue, 10/20/2009 - 18:17
3
by marylandbob
Wed, 10/21/2009 - 21:22
Normal topic How difficult is it to rewind a 1-phase 115V motor to a higher voltage 3 phase motor
by terramir » Tue, 06/02/2009 - 01:57
3
by james joule
Fri, 08/21/2009 - 05:56
Normal topic 1 HP Scott motor, Calculations, from the battery side
by echuckj5 » Sun, 10/07/2007 - 06:34
3
by echuckj5
Sun, 10/07/2007 - 14:40
Normal topic DIY electric motor in the 10kW range.
by axbor22 » Tue, 07/06/2010 - 23:02
3
by axbor22
Wed, 07/14/2010 - 22:42
Normal topic Mars brushless wiring question
by ruprek » Mon, 10/06/2008 - 06:26
3
by reikiman
Mon, 10/06/2008 - 18:22
Normal topic Motor Modifications for more RPM
by PJD » Tue, 01/09/2007 - 09:07
3
by circuitsmith
Wed, 01/10/2007 - 10:15
Normal topic Hub Motor vs. Frame-mounted Motor with Chain Drive
by xring » Wed, 07/09/2008 - 10:12
3
by LinkOfHyrule
Wed, 07/09/2008 - 15:21
Normal topic Looking for replacement brushes
by mf70 » Mon, 06/01/2009 - 09:54
3
by mf70
Thu, 07/02/2009 - 10:39
Normal topic Motor mounts.. where to get them?
by reikiman » Thu, 05/06/2010 - 08:15
3
by strawhistle
Thu, 05/06/2010 - 13:02
Normal topic Best motor for hill climbing with load
by gwh68 » Fri, 05/08/2009 - 07:44
4
by gwh68
Sun, 05/10/2009 - 16:09
Normal topic REWINDING A DC BRUSH-TYPE MOTOR
by Gman » Tue, 08/28/2007 - 07:13
4
by tundrawolf
Mon, 12/19/2011 - 13:43
Normal topic Alternator Output Question
by Rane » Thu, 08/28/2008 - 22:55
4
by LinkOfHyrule
Fri, 08/29/2008 - 23:05
Normal topic Drill Motor: An Option?
by engr_scotty » Tue, 07/15/2008 - 09:21
4
by dogman
Tue, 07/15/2008 - 11:37
Normal topic Guide me on selecting motor & controller
by YUVARAJ » Fri, 03/20/2009 - 03:32
4
by dogman
Sat, 03/21/2009 - 05:14
Normal topic Linear actuator motor
by countersunk » Mon, 02/15/2010 - 23:02
4
by countersunk
Fri, 02/19/2010 - 00:57
New posts
No new posts
Hot topic with new posts
Hot topic without new posts
Sticky topic
Locked topic

Subscribe to RSS - Electric vehicle motors (DC motors, AC motors, hub motors, etc)


Who's online

There are currently 0 users online.

Who's new

  • Naadu_b@
  • SolarRichT
  • victoria098
  • PtheDude
  • Gilles

Customize This