Error message

Warning: number_format() expects parameter 1 to be double, string given in number_field_formatter_view() (line 305 of /home/robogeek1/visforvoltage.org/modules/field/modules/number/number.module).

Cyclone Kit Electric Mtn Bike

Lighting: 
magnetic induction coil from magnets on spokes powers lights LED
Number of wheels: 
2
Heater: 
N/A

You probably like me, are looking at all the different E.V.'s and seeing what's different on each members project. On mine the bike has 4 front chain wheels, 1 the outer front chain wheel is driven by the cyclone 720W motor, which I decided to mount in my own way as opposed to the conventional lower slung under the frame. The inner 3 front chain wheels are the std bike chain wheels. The trick was to bolt the original 3 chain wheels to the chain wheel supplied with the kit. This made a total of 4 chain wheels this enabled all the bikes original gearing.
mtb elec.jpg
Photo073.jpg

Drivetrain: 
cyclone free wheel modified
AttachmentSize
Image icon Photo073.jpg25.29 KB
Controller: 
External 36V
Location: 
UK Kidderminster
Batteries: 
12V X3 in series 36Volt 12amp SLA
Charger: 
12v charger when batteries wired in parallel from DIY plug
Miles as an EV: 
New Project 100miles
Seating capacity: 
1
Top speed: 
28 mph
Motor: 
Typical range: 
15miles
System Voltage: 
Vehicle Type: 

Comments

Pretty cool, keep it up, and ride safe.
Thanks for the picture, and post.

Jim


Who's online

There is currently 1 user online.

  • flapjacksbestof

Who's new

  • Naadu_b@
  • SolarRichT
  • victoria098
  • PtheDude
  • Gilles

Customize This