axial blowers

5 posts / 0 new
Last post
MarkXP
Offline
Last seen: 17 years 10 months ago
Joined: Friday, January 26, 2007 - 23:17
Points: 3
axial blowers

hi all this is my fist post at the voltage forums, i used to always visit the old site before some punk hacked it. the old site looked far more professional but who can complain (its not like we pay for this) so thanks ken or who ever pays for this site. ok what i want to find out is where can i get an axial blower like lots of people here have such as 24v 10w or even a 12v one thats still 10w any help would be greatly apriciated as i cant find what i need. im running a schwinn s-200 ive put the voltage up to 48 volts and it absoloutely hammers the only prblem is i have to stop every few mins to check motor temp but with a decent blower this shouldnt be necassary. thanks to all who can help.

Fechter
Fechter's picture
Offline
Last seen: 15 years 11 months ago
Joined: Friday, November 17, 2006 - 07:01
Points: 199
Putting a blower on the

Putting a blower on the outside will only do so much for cooling because the heat has a hard time getting from the windings to the outside. It's best to take apart the motor and drill holes through the case and blow through the motor with a centrifugal blower (not a fan).
There's a good description of one person's version here: http://endless-sphere.com/forums/viewtopic.php?t=119

If drilling out the motor is beyond your skill level, then adding a fan to the outside can't hurt, although it's possible to burn out the insides and still have a cool outer case.

Gman
Gman's picture
Offline
Last seen: 16 years 10 months ago
Joined: Monday, November 20, 2006 - 23:24
Points: 1720
axial blowers

MarkXP
:?
What is a axial blower?

From the V is for Voltage Archives

Are you involved in your V is for Voltage Community? :?
Gman,
What is our preferred future?

Peace Out, <img src="http://tinyurl.com/ysafbn">
Gman

MarkXP
Offline
Last seen: 17 years 10 months ago
Joined: Friday, January 26, 2007 - 23:17
Points: 3
ive already drilled holes in

ive already drilled holes in the motor just to let it breathe a little, i have fans but they are useless, all i need is for someone to point me in the direction of a online shop that sells a blower like the one in the picture above. cheers

Gman
Gman's picture
Offline
Last seen: 16 years 10 months ago
Joined: Monday, November 20, 2006 - 23:24
Points: 1720
shop that sells a blower like the one in the picture

MarkXP

Centrifugal blower "24V 10W", it cost about five bucks from Marlin Jones electronics.
I suggest looking for a local Electronics store similar to http://www.mpja.com/

Are you involved in your V is for Voltage Community? :?
Gman,
What is our preferred future?

Peace Out, <img src="http://tinyurl.com/ysafbn">
Gman

Log in or register to post comments

Buy Ecotric bikes, get free accessories!


Who's online

There are currently 0 users online.

Who's new

  • eric01
  • Norberto
  • sarim
  • Edd
  • OlaOst

Support V is for Voltage