my bicycle brushed motor have a mistake....

2 posts / 0 new
Last post
Last seen: 15 years 11 months ago
Joined: Wednesday, February 21, 2007 - 22:53
Points: 19
my bicycle brushed motor have a mistake....

ok when i acelerate the trottle the motor runs slowly.but when i place the motor direct to the battery it works stronger.i check all the connections and i suppouse are well installed.what is the mistake?i need to fix the motor?ok the nut of my rim was short the circuit of the motor.i fix the problem but right now i lost the performance of the motor. the internal parts of the motor burns out? THANKS FOR THE ATTENTION.

Last seen: 16 years 2 weeks ago
Joined: Saturday, December 9, 2006 - 18:56
Points: 67
Re: my bicycle brushed motor have a mistake....

If the motor runs stronger from a 12-volt battery then there is nothing wrong with the motor. I would be looking at the controller. If the output of the controller was shorted then it very likely it is bad. I would replace the controller now that you know how to connect it.

V is for Voltage
Moderator captain

P.S. There is no need to start a new post each time you answer. Please use the "Reply" link at the bottom of the post you wish to reply to.

Good Luck!

Chas S.
Moderator Team Captain

Log in or register to post comments

Who's online

There are currently 0 users online.

Who's new

  • wild4
  • justinsmith07
  • Juli76
  • xovacharging
  • stuuno

Support V is for Voltage