100 amp 48-60V controller

5 posts / 0 new
Last post
Jazzyrigged
Offline
Last seen: 17 years 1 week ago
Joined: Monday, April 2, 2007 - 13:20
Points: 14
100 amp 48-60V controller

I saw a controller on evparts.com
It's rated 100amp max 48-60v.
My question is does anyone think this could power an electric motorcycle? I've been looking at the alltrax 7234, but at $475 it may be out of my price range for this product.

Would I be wasting my time with the 100amp max controller?

Again thanks in advance to all you knowledgeable folks, Jazzy.

andrew
andrew's picture
Offline
Last seen: 14 years 10 months ago
Joined: Tuesday, November 28, 2006 - 17:21
Points: 1361
Re: 100 amp 48-60V controller

The wiring looks a bit small for 100 amps continuous. I haven't used it so I can't say how it performs. If you are hard pressed for cash than it might be a good choice. Best I can say is make sure it has a warranty and buy it. Otherwise, look for a used Curtis or Alltrax. 150 amps is also not very much for a motorcycle.

---
Avatar taken from http://www.electricmotorbike.org/
Anyone got one they might want to sell?
My KZ750 Project: here E.T.A. 1 mo

[url=/forum-topic/motorcycles-and-large-scooters/587-my-kz750-electric-motorcycle-project]KZ750 Motorcycle Conversion[/url]
[url=/forum-topic/motorcycles-and-large-scooters/588-fixing-my-chinese-scooter]900 watt scooter[/url]
Pic from http://www.electri

magudaman
Offline
Last seen: 16 years 3 months ago
Joined: Wednesday, March 14, 2007 - 10:00
Points: 61
Re: 100 amp 48-60V controller

Hey I have one of those controllers and has treated me pretty well during it service but I'm at work right now and can hopefully give you a little mini review with some pictures. Mine is set up for 24-60 or something like that, they have no cuttoff. But more about that later....

Jazzyrigged
Offline
Last seen: 17 years 1 week ago
Joined: Monday, April 2, 2007 - 13:20
Points: 14
Re: 100 amp 48-60V controller

Thanks for the advice Andrew. You are proving to be an exceptional weath of information.

I pretty much debated the whole weekend about that controller. I think I'm going to heed your advice and stick with either an alltrax or curtis used controller.

On a nice sidenote I pulled the engine out of the Rebel this weekend, so hopefully I can get the wheels off and start prepping the frame this week. We'll see how it goes and thanks again everybody for the good info.

decibel1
Offline
Last seen: 13 years 8 months ago
Joined: Wednesday, December 13, 2006 - 09:49
Points: 170
Re: 100 amp 48-60V controller

You can buy a 48V 100A controller (Model YK42-4) Yi-Yun Brand Controller from tncscooters.com for only $40 plus shipping. I have tried this controller and it is simple but heavy duty, and it puts out lots of current. It uses a Hall-effect throttle.

Log in or register to post comments

Use code"Solar22" and enjoy 12% off for all solar Kits.


Who's online

There are currently 0 users online.

Who's new

  • eric01
  • Norberto
  • sarim
  • Edd
  • OlaOst

Support V is for Voltage