WE NEED MORE POWER
SLA's SUCK BIG HEAVY SHLONG
I need three times the power at half the wieght and i would even pay double but who can afford lithium
Who's online
There are currently 0 users online.
Who's new
- eric01
- Norberto
- sarim
- Edd
- OlaOst
There are currently 0 users online.
Looks like fun projects, I'll bet you get stopped a lot with many questions.
Could you please post for each, the:
System voltage
Motor model
controller model
top speed
battery pack amp-hour size range
motor/wheel sprocket tooth counts
And also, other than an upgrade to Lithium, is there anything that you would have changed for any of these builds if you were going to do it again (for the benefit of others who want to copy your set-up)
Thanks !!
You are asking for quite a bit but this eve I will sit down and input the info.
should I put it some place specific? Seems like everything should have its place
and I'm still green to this site. Please let me know.
I'd just list it all on this post. I know I asked a lot, but your projects are very impressive! I just thought it would be great if you posted up front the answers to most of the question that I already KNOW you will be asked!
Some enthusiasts only check in once a week or so, don't feel ignored if there aren't a lot of responses right away. Most new posters are asking a lot of questions, and you seem to be someone who could ANSWER a lot of questions!
This website and Endless-Sphere are by far the two best sites for E-bikes, E-scoots, and E-motorcycles. I would even recommend you decide which one of these bikes is the one you're happiest with, and post it in the EValbum.
Thanks again for posting here @VisforV!
Didnt get a chance to sit down tonight. Just purchased a home so the honey-do-list grows longer every day
and I have three other projects being neglected because of her......................
Oh, wait a second, heres where she tells me to do a priority check. You know how it goes.Any way............
No work tomarrow so I ll do it then.
Hey if you know someone whos good w/controllers Iposted two questions abuot controllers 1205-117 and DCX
sure do need some help w/those if possible
C YA