Burnt-out Currie BLDC controller

2 posts / 0 new
Last post
dermot
Offline
Last seen: 14 years 2 months ago
Joined: Wednesday, January 20, 2010 - 08:06
Points: 3
Burnt-out Currie BLDC controller

My old Currie ElectroDrive stuttered yesterday, then some of the magic smoke escaped from the controller area.

This is a very old one using a brushless DC motor and integrated controller.

I believe that repairing the controller is not really feasible, but that, with care, it can be removed making the phase and hall wires for the motor accessible.

Anyone done this and has documented the process? I have a couple of Crystalyte controllers and appropriate batteries (battery is 36V 13AH NiMH, controller is 20A) - might they be suitable as an external replacement? The original runs on 24V and I think it was rated at 24V - will the motor survive if I run the new controller at 36V?

The mechanics is in very good order, and it has run so well that I'd like to recover it if possible - I've not found anyone in the UK who actually holds stock of new motors - think they've changed a lot over the years anyway.

All help gratefully received...

dermot

jateureka2
Offline
Last seen: 8 years 8 months ago
Joined: Wednesday, May 5, 2010 - 15:04
Points: 21
Re: Burnt-out Currie BLDC controller

I haven't done this but I see over on the Endless Sphere forum that people have done it with the Cyclone motors.
http://endless-sphere.com/forums/index.php

E-BIKES: [1]Ezee Sprint [2]Aprilia Enjoy Racing [3]eLation V2 e-bike kit on Trek 4100 [4]Bafang BBS01 kit on Fluid Momentum [5] FreeGo Hawk
E-SCOOTER: 2012 ZEV 7100 LR, 84V 60Ah nominal battery with 28 series GBS LFP cells
E-MOTORCYCLE: 2011 Zero S,

Log in or register to post comments


Who's online

There are currently 0 users online.

Who's new

  • Juli76
  • xovacharging
  • stuuno
  • marce002
  • Heiwarsot

Support V is for Voltage