Readers of V is for Voltage often overlook those four wheel pioneer toiling away creating EV's and charging infrastructure that will prove useful to all EV users in the future.
One such Pioneer is the Australian Ross Blade. The history of the Blade Electron is astonishing!
As those who have read my posts from time to time will attest, I am not very tolerant of snake oil and vaporware merchants!
Ross Blade is probably one of the most sincere and honest engineers I have ever met.
It's unfortunate that he is located in a small Australian provincial city. The Australian government has not been very supportive of EV development. I suppose the Australian federal and state governments attitudes are not really surprising considering the concern to retain the significant employment created by a marginally profitable local car industry consisting of three major manufacturers! Australia also possesses vast reserves of cheap natural gas (LPG).
Nevertheless, Ross Blade has persisted. Blade produced the first real modern four door, four seater EV. beating iMev and Nissan Leaf by four years.
The new offering from Blade boasts a range in the vicinity of 200klm+ and has an all Australian Drive train.
I own and operate three Blade Electrons. I can attest to the reliability and quality of these tough little cars.
For those interested, check out the Blade website. www.bev.com.au/
Cheers.
Hi Marco,
do you own one of the new models?
can you shed any light on where Ross sourced an Australian made motor and controller?
Aside from tritium, I know of no other Australian EV drivetrain.
The older models used azure AC24LS, which is pretty good for what it is, if a bit over priced.
cheers,
Matt
Daily Ride:
2007 Vectrix, modified with 42 x Thundersky 60Ah in July 2010. Done 194'000km
No, I'm sorry I don't own one of the new model,(Although I will order one)Unfortunately I have no information on the drivetrain.
I am returning to Australia in March and will visit Ross in Castlemaine to test drive the new model. But, I am sure if you rang, or emailed, Ross, he will be only too happy to supply information.
Matt, as an Australian, (and pretty knowledgeable about EV's), why do you think Australians (and the world) make such a fuss of iMev etc, and ignore their own home grown EV, which has evolved to be a pretty damn good small EV?
Where ever I travel (outside of NZ) no one seems to have heard of Ross Blade's achievements. This is exceedingly disappointing. Many Australian EV supporters seem to have the attitude that if it's Australian, it can't be good.
I constantly hear the cry from environmentalists, condemning oil companies and ICE automakers, for EV transport. Especially members of the Green Party, yet when you ask if they dive an Electron, they always come up with some feeble or irrational excuse!
Sad to see, imagine what Ross could have achieve if the SA government had given him and Mitsubishi the enormous subsidy and support offered to Misti to maintain production at the old Tonsley Park plant, instead of paying PRC workers $1.90 per hour to demolish it!
A range of EV commercial vehicles could have been produced specially adapted to Australian and NZ conditions.
But I guess a prophet has no honour in his own country, is a very true maxim.
marcopolo
My excuse is that I cannot afford new cars! Doesn't matter what type of propulsion and energy source it uses, it's too expensive.
The Vectrix was the only new vehicle I ever bought (except for one bicycle, but most bicycles I have owned were used, too!)
However, some state governments are making (or have been making) a lot of noise about good intentions re: emissions reductions, supporting solutions etc.
I wonder if one could pull it off to get the Blade Electron added to the list of available vehicles for government employees? I managed to get approval for some free scooter charging points in Australia that way, shame they are going totally unused since the Vectux is defunct.
Here some useful arguments in case someone wants to have a go at submitting a business case:
Of course these quotes are becoming a bit dated now, but a few hours of trawling the net will undoubtedly reveal an even larger amount evidence for the need of government institutions to support EV's in order to do what their bosses are promising they would do!
This information may be used entirely at your own risk.
There is always a way if there is no other way!
Wow Mik, thanks for the super detailed reply!
Yes indeed, (sigh) Australian governments of all persuasions have been very long on rhetoric and very short on action! Australia's vast natural resources and relatively secure economy, has definitely bred complacency and incompetence.
Mik, your point about lack of support from the Australian government car fleet of 8000 vehicles (and another 138,000 elective or managed fleet), is very valid! If the government ordered just 5% fleet as EV's, (or .05 of the elective fleet), the support for Blade would be electrifying! (excuse the pun!).
.
You have my empathy, especially with the recent devastation in Qld!
However, a pre-owned, but fully reconditioned Blade Electron is only $29,000. (or $ 98 dollars pwk*, hey! You could trade-in the Vetux!). If the owner saved $52.00 pwk on petrol, that's only $48.00 pwk! Or $6.83 per day. Allow futher savings on servicing and maintence savings, maybe $3.40 per day. Now deduct the capital cost of a redundant ICE vehicle. The result could be as low as $2.00 per day to own and operate your own EV!
Everyone can afford $2.00 a day! Not bad for a clear conscience? Hell, that's not even the price of a beer!
(I know I have deliberately put an optimistically positive interpretation on the math to prove my point, but the priciple is worth consideration)
My observations are not aimed at those who are genuinely unable to afford new cars, but directed at all those Chardonnay green-left voters, whose lack of support for Blade result in so few second-hand units available for those who would like to buy an EV, but can only afford a used model
If the three most congested Australian cities developed incentives such as special parking and peak hour lane concessions for EV's, Blade's sales would become more viable.
The Sydney City Council decided to purchase a far more expensive, imported iMev as a test vehicle, and made EV adoption dependent on using solar power from the roof of the town hall! The reason why Lord Mayor Clover Moore preferred the imported Mitsubishi product over the Australian Blade remains unclear, and Mayor Moore has declined to answer why she elected to ignore SCC 'buy Australian' guidelines. ( Maybe just anti-Victoria)
Brisbane City Council has made some effort to incorporate Hybrid technology in the BCC fleet, but this doesn't translate to any real support for Blade.
Melbourne City Council, actually purchased a Blade for its 1017 vehicle fleet. It also boasts two hybrids.
Blade has experienced marginal success with other suburban local governments, mostly just purchasing a token test vehicle.
Some of the excuses trundled out by Government and councils alike are;
1)"Our fleet management consultants recommend waiting until EV's are more established"(catch 22)
2)" Waiting until Fleet resale prices are established" (catch 22)
3)"We have commissioned a 5 year study with RARE Consulting Services" (obsolete before complete).
4)"Safety and Insurance considerations for employees, they might be electrocuted or not hear an EV." (Silly) 5)"Waiting until recharging infrastructure guarantees all green power" (smugly pathetic excuse)
6)"No charging infrastructure." (what, no power points in all those municipal facilities).
7)"Need a certified member of the Electrical Trade Union to plug in to power points(British absurd) etc etc...
If all Australia's various Publicly Funded Intuitions institued a policy to spend a mere 5% of urban fleet budget to buy EV's, coupled with support/tax relief/registration/insurance/ parking/ etc.. incentives, Blade would have to build 20,000+ EV vehicles pa to satisfy this demand.
With production potential of that magnitude, Hyundai would have joint-ventured an assembly/manufacturing plant in Australia. Other Australian car makers would either choose to start building EV's, or lose market share.
Given a 3-4 year lead on rivals automakers, Blade could have established itself as a front runner in the EV market and established export capacity.
With Hyundai's collaboration, Blade could be producing 50-100,000 Australia manufactured EV cars and light commercials pa. With modest support, Australia's universities could have become a centre for EV R&D funding and research.
Australia, has not only large scale lithium deposits, but also rare earth alternatives to dependence on PRC or Bolivian deposits.
All it would have taken was a little government initiative to fulfil the rhetoric.
But, what about the rest of us Australians?
Every day I hear Australian environmentalists bleating on about the inportance of environmentaly beneficial transport, but what do car do they drive? There's always some lame excuse why they haven't supported the local product. US, European, South Americans, Asian and Africans, can reply "we haven't been able to buy an EV until the leaf, iMev, Volt" etc....but Australians could have bought an EV, for the last 4 years, but wouldn't.
All those conspiracy theorists who rant on about the film " Who killed the electric car", crying "I would have bought one, but evil GM crushed them all"! Well, where are you now, why arn't you driving a Blade?
The same applies to Australian business and Unions. Always waiting for someone else set the example.
When I withess the passion and fanatical support for the defective and appallingly miss-managed Vectrix, I am astounded at the total lack of recognition and support for the achievements of Ross Blade's Electron.
(I have no financial or material interest in Blade).
marcopolo
Great post MarcoPolo
The Blade isn't the only one actually.
http://www.flickr.com/photos/energetique/3970474317/
Made in Armidale. Not to the same volume as the Blade, but similar in that it's also ignored...
=:)
Jason
Blogging my Zero DS from day one http://zerods.blogspot.com/
Thank you for your reply. However, the evme by Energetique Pty Ltd, is little more than a home built conversion. Produced by converting a Mazda 2 subcompact, (without Mazda authorisation). The entire 'production run' consisted of 2 vehicles plus a prototype before the Australian securities Regulator, (ASIC) prosecuted Energetique Pty Ltd and its director, Philip Coop, for unlawfully attempting to raise investment capital from the public without an approved, audited, and accurate prospectus.
A further blow was dealt to the company when neither of the two vehicles could be independently assessed to achieve the performance claims made by the designer and founder, Dr Phillip Coop, a former Tech college lecturer. The sole 'customer' glowing testimonial was somewhat compromised by his vested interest.
This may account for the absence of any new regarding vehicle sales, since 2009's optimistic predictions.
Fortunately, this is not a case of a conman with a slick website, selling vapour-ware. Actually, Dr Coop is just an idealistic, academic dreamer, with no business knowledge, or capacity to convert his dreams to reality.
His latest venture is to team up with a former sales employee of the UK Reva-G-Wiz (now defunct)importer, Keith Johnson, and try his luck in UK with a converted VW Caddy light commercial van. (again without VW authorisation). Dr Coop reports since his visit to the UK at least a 'Dozen' people have shown interest in his EV electronic system!
Dr Coop is quite a passionate and interesting speaker. He appears from time to time at Environmental gatherings, and his lectures are usually quite well received.
Qualifying as an Auto-manufacturer in Australia, is very difficult. Australia has some of the highest DR's in the world. Licencing requires a very substantial level of investment, independent crash testing and warranty bond. Ev's must be fitted with airbags, Electronic Stability Control, Anti-lock breaking, safety inspections, spare part stockpile, independent consumer certification of performance and engineering specifications, etc..
Years and years of government red tape. This is way beyond the capacity of a hopeful dreamer and a handful of enthusiastic students.
This is a further insight into why Ross Blade's achievement at becoming a fully accredited auto-manufacturer,is so very remarkable.
marcopolo
The blade is a great achievement. It is hard to get the right to fit compliance plates. Australian design rules are very tough to meet. Just a note though, there's no requirement for antilock brakes and no requirement for Electronic Stability Control (well not that I can find in the ADRs anyway).
The EVME is indeed little more than a conversion, done by converting an existing car. But so is the blade. It's a Hyundai Getz. Blade even used to have a price for converting your personal Getz to electric and currently sells a variety of parts to let you do the conversion yourself (not just spares for your blade).
Yes, the blade has been granted a production licence. It's great. But it was only granted in October last year. So for the four years before that it was in the same situation as the EVME. If the EVME is somehow worthless as it lacks that licence, how are the second hand Blades that you suggested "better" in any way due to the licence that was granted years after their manufacture?
I don't understand...
=:)
Jason
Blogging my Zero DS from day one http://zerods.blogspot.com/
You are quite correct. To manufacture automobiles in Australia, you must comply with both Federal and State registration requirements. Victoria requires all new passenger cars seeking registration and RWC, to be fitted with ESC. NSW, Queensland and Tasmania, will introduce the same requirement in 2012.
Again you are correct, although Blade is winding down the kit sideline. But Blade is now much more than just a conversion. Blade has the support and collaboration of Hyundai. (although this may one day prove problematic)But essentially you are right. Quite a number of the most famous specialist marques, started out as kit cars or using major components from established manufacturers. Jensen, Morgan, Bolwell, TVR, Lotus,Eureka, AC Cobra, Marcos,(even triumph), and many others followed this route to gain enough recognition to expand into full production. Blade is currently developing its own unique drive-train technology.
In the early 20th century most marques only produced the chassis and drive-train. The purchaser then engaged the coach-builder of his choice for the bodywork. There's an amazing coach-builder in Japan (Mitsuoka Motor Company )who will build you a really incredible EV from the chassis of an Mazda MX 5 with awesome bodywork and 500 klm range. The only drawback is price!
Blade 'pre-owned' (more classy) EV's are 'better' for 6 main reasons;
1) Blade 'pre-owned' values are recognised by the Finance companies guidebooks.
2) Blade recondition and update every 'pre-owned'vehicle sold by BEV
3) Blade is able to be serviced an warranted for all its ICE components by the 150 Hyundai service chain throughout Australia and NZ. Mazda states that EVME's modifications render Mazda's warranty null and Void.
4) Blade provides a guaranteed buy back price to maintain the viability of it's 'pre-owned' resale value.
5) Blade 'pre-owned' vehicles actually exist! It's kinda difficult to assess what a EVME is worth when only be two or three exist. According to the Australian Bureau of Statistic less than three evme are in existence.(difficult to estimate because there is no official listing for EVME, since is not a recognised marque).
6) Blade is now an actual marque for insurance purposes. The Getz glider very low panel repair cost, ensures low insurance premiums.
I hope this information is useful. Oh, one last point. Here's something you can't do with GM, Ford or Nissan. If you're every near Castlemaine in Victoria, and you have time, you can drop in and meet the creator of the Blade Electron! I'm sure you'd be a very welcome visitor.
Cheers..
p/s What is it that interests you about the evme?
marcopolo
Oh, ok. I understand now. Thanks for explaining.
As an outsider they did appear pretty similar (apart from volume). I get the feeling that energetique is not all that interested in actually building cars, rather developing and licencing stuff to overseas builders. The EVME seems more like a proof of concept/test car. But unlike so many test cars you can actually buy one.
My only interest is the general one that I wish all EV builders success and like you, I don't understand the way everyone got all excited about the "killed" electric cars, but who then don't buy one.
=:)
Jason
Blogging my Zero DS from day one http://zerods.blogspot.com/
Yes, I agree, i think that would be a fairly accurate assessment of Energetique.
Yep, that right! Interestingly the main contents of the film were very sensationalised and wild inaccurate. Yet, the premise has been accepted by so many people as gospel that evil GM, (and oil companies) "Killed the Electric Car', then get in their SUV's and drive away.
marcopolo