Hi Guys,
Does anyone here have an official Lithium vectrix and a usb-can adapter?
I'm trying to work out what exactly the official Lithium Vectrix BMS puts onto the CAN bus
I have a CAN based BMS in development, which I am hoping to use in place of the vectrix BMS, allowing many other different cells types, including the new leaf modules
cheers,
Matt
Hi Matt,
I've them: Li+, Peak PCAN-USB adapter and PCAN-View app on PC (http://www.peak-system.com/PCAN-USB.199.0.html?&L=1).
How can I help you??
Give me precise instructions, I am not very expert.
Greetings.
Luca
Luca
2008 Vectrix VX-1
Rome - Italy
Hi Matt!
Here you are another Li+ user with peak-cable.
Regards
Manuel P.
Thanks guys,
I just need to remember how to do CAN logging now.
I will post up some instructions when I work out how to do it again
Daily Ride:
2007 Vectrix, modified with 42 x Thundersky 60Ah in July 2010. Done 194'000km
I just remembered this post in the collaborative hand book:
http://visforvoltage.org/book/ev-collaborative-hand-books/6916
Initially I just need to get a CAN log, for about a minute, with a Vectrix in the following states, using the can hacker software used by Mik in the collaborative handbook:
On - ready flashing (side stand down)
On - ready solid (side stand up)
On - Go
Thankyou for helping :D
cheers,
Matt
Daily Ride:
2007 Vectrix, modified with 42 x Thundersky 60Ah in July 2010. Done 194'000km
Hi Matt, all,
Regarding the CAN messages, I have tried to figure it out in the last few days the same way. Just realized it was in front of our eyes all the time. The XML files in the Vectrix Diagnostic/PGNChartFilesDirectory :)
/ Azzuro
.
There are more - anybody willing to share? With an icloud-ID so I can share an Apple Numbers file?