CAN Bus adapters?

3 posts / 0 new
Last post
gln103
Offline
Last seen: 11 months 1 week ago
Joined: Sunday, November 21, 2010 - 15:26
Points: 27
CAN Bus adapters?

I don't own a PCAN adapter, but I do have access to several other CAN adapters. I tried two different CAN to USB adapters made by ESD Electronics and Kvaser . They both give access to the CAN network raw data, but neither unit functions with the scooterdiag.exe software. Hence, not very useful.

Has anyone been successful using a different CAN network adapter than the PEAK PCAN unit to interface to the Vectrix CAN network and use Vectrix's scooterdiag.exe diagnostic software?

pyjohnson
Offline
Last seen: 1 year 6 months ago
Joined: Thursday, March 20, 2008 - 13:53
Points: 74
Re: CAN Bus adapters?

I tried an EasySYNC USB2-F-7001 but that didn't work either.

They even looked into writing a bit of code for me, to make it work with the diagnostic software but was going to be too difficult. Something about the protocalls are too different.

The diagnostic software uses the pcan-bus.dll file and that only seems to talk to PEAK's adapter.

So I gave up and bougt the real thing

Hope you have more luck than I did

Regards,
Peter

-----------------------------------------------------------
Central Scotland

AndY1
AndY1's picture
Offline
Last seen: 10 years 8 months ago
Joined: Tuesday, June 17, 2008 - 04:29
Points: 1071
Re: CAN Bus adapters?

Wrong forum. Sorry :-)

Log in or register to post comments

Buy Ecotric bikes, get free accessories!


Who's online

There are currently 0 users online.

Who's new

  • xovacharging
  • stuuno
  • marce002
  • Heiwarsot
  • headsupcorporation

Support V is for Voltage