Need Giant LaFree Part.

3 posts / 0 new
Last post
deronmoped
Offline
Last seen: 15 years 5 months ago
Joined: Tuesday, December 25, 2007 - 08:18
Points: 342
Need Giant LaFree Part.

I just picked up a pair of LaFree bikes, one works real good, the other I found that the throttle position controller is shot. Anyone know where I can get one? Will other TPC's work?

Thanks, Deron.

deronmoped
Offline
Last seen: 15 years 5 months ago
Joined: Tuesday, December 25, 2007 - 08:18
Points: 342
Re: Need Giant LaFree Part.

Allright, so I attached the TPC with some dikes and a knife and got down to the connections on the Hall component, turns out to be a bad solder joint. I fixed and tested it and the bike's test program said it was OK. I then used some hot melt glue to secure it in place. Road tested the bike with no problems.

Deron.

deronmoped
Offline
Last seen: 15 years 5 months ago
Joined: Tuesday, December 25, 2007 - 08:18
Points: 342
Re: Need Giant LaFree Part.

A couple of things I have learned:

This part of the forum is dead. I though there would be more interest in these bikes.

I found that fixing things, can be a lot faster, easier and of course cheaper (if you do not count your labor, whatever that is worth). I tried ordering the part, no luck there.

Deron.

Log in or register to post comments

Buy Ecotric bikes, get free accessories!


Who's online

There are currently 0 users online.

Who's new

  • Skyhawk 57
  • wild4
  • justinsmith07
  • Juli76
  • xovacharging

Support V is for Voltage