Neodymium swap in 400w kollmorgen motor?

1 post / 0 new
noobster's picture
Last seen: 11 years 9 months ago
Joined: Friday, May 16, 2008 - 20:11
Points: 45
Neodymium swap in 400w kollmorgen motor?

After doing a external controller swap I'll be ditching one of the two koll motors on my bike. With the extra I'm going to try a neodymium magnet swap. According to this page the 400w koll has a cylindrical magnet with 18 poles glued to a steel core. Would these magnet work for it? if I could find a set of 18 multi curved bar magnets the same ID and roughly the same OD as the stock magnet could I glue them to the steel core? I don't get how it cold have 18 poles and work. I'm new to brushless. Thanks -Ryan.

Who's online

There is currently 1 user online.

  • flapjacksbestof

Who's new

  • Naadu_b@
  • SolarRichT
  • victoria098
  • PtheDude
  • Gilles

Customize This