I have trouble looking into archives to find if someone hasn't already posted a similar thread, in this case I really would have expected this might have been the case.
It's about 2 little red reflectors that are loosely mounted on the plastic mudshield on the back of the Vectrix. (One is actually hidden under my license plate).
They are "click" mounted on there, and it took a while for me to realize that they produced a rattling sound when driving over bumps etc.
I took them off, put some piece of rubber leftover behind them, and then put them back.
Rattling gone, I'm happy.
Check yours, you'll see what I mean (unless my V is different??:-))
rattling reflectors
Wed, 09/16/2009 - 12:39
#1
rattling reflectors
Who's online
There are currently 0 users online.
Who's new
- Bengun
- Skyhawk 57
- wild4
- justinsmith07
- Juli76
Support V is for Voltage
That might also fix the problem that muddy water comes through the gap and then runs down the black mudflap and dries on. (I had to drive through a roadwork site with muddy surface a few times.)
I'll have to put the hot glue gun to the inside of the mudgard one day....
This information may be used entirely at your own risk.
There is always a way if there is no other way!