How do I remove the freewheel from the rear hub

9 posts / 0 new
Last post
electricgreg
electricgreg's picture
Offline
Last seen: 16 years 3 months ago
Joined: Saturday, February 17, 2007 - 09:50
Points: 23
How do I remove the freewheel from the rear hub

Hi all,

My panterra scooter has a defective freewheel unit. See picture for the replacement part. How do I take off the old one? Is it threaded on the hub? It looks like it has 2 dimples 180 degrees apart on the face that act as a place to put in a removal tool to unscrew the unit. I fabricated a toollast night and turned the unit counterclockwise but it wouldn't budge. Any suggestions?

AttachmentSize
Image icon SPR-SB4HA.jpg20.95 KB
Deafscooter
Deafscooter's picture
Offline
Last seen: 16 years 9 months ago
Joined: Friday, November 17, 2006 - 17:39
Points: 519
Re: How do I remove the freewheel from the rear hub

Deafscooter is Here...

Yes i can do Remove the Flyeheel Sprocket off from Wheel by threaded on center
=

if it has 2-4 notch on it, using special tools to CCW turn to remove the threaded
=

if it has no notch on it then you need welding glued the ratches to lock then do
force CCW to unscerw ratches on sprocket to remove it ( it will throw the ratches )
=

Here two Sprocket have No Notch & 2 or 4 Notchs on BMX type freewheel sprocekt

Sprocktl.jpg

Best use TIG Weld to Glue the locking the ratches sprocket to remove it & throw it :(

Craig Uyeda
Deafscooter

deafscooter

Buckeroo Bob
Buckeroo Bob's picture
Offline
Last seen: 12 years 4 months ago
Joined: Saturday, December 9, 2006 - 18:00
Points: 148
Re: How do I remove the freewheel from the rear hub

If you don't have a welder, what I did was to first soak the threaded part with penetrating oil, Then apply some heat with a propane torch (not too much), then use that tool you made. Gritting your teeth and cursing will help! :D

electricgreg
electricgreg's picture
Offline
Last seen: 16 years 3 months ago
Joined: Saturday, February 17, 2007 - 09:50
Points: 23
Re: How do I remove the freewheel from the rear hub

Thanks. I will try the propane torch because I dont have access to a welder.

Cheers,
Greg

Deafscooter
Deafscooter's picture
Offline
Last seen: 16 years 9 months ago
Joined: Friday, November 17, 2006 - 17:39
Points: 519
Re: How do I remove the freewheel from the rear hub

Deafscooter is Here...

Greg, you try that and it will heat to melt the alum wheel

and can you post picutre the rear wheel with sprocket on

if you do succsufully remove & please picutre on it & post

Thank you
Deafscooter

deafscooter

Buckeroo Bob
Buckeroo Bob's picture
Offline
Last seen: 12 years 4 months ago
Joined: Saturday, December 9, 2006 - 18:00
Points: 148
Re: How do I remove the freewheel from the rear hub

You do need to pay attention to the heating of the freewheel, but I had no melting of the 2 wheels I worked on. It's true that if you just apply the heat in one spot and let it stay there long enough, you might melt something. Use care and patience and you shouldn't have any problems...but there is always that chance!

electricgreg
electricgreg's picture
Offline
Last seen: 16 years 3 months ago
Joined: Saturday, February 17, 2007 - 09:50
Points: 23
Re: How do I remove the freewheel from the rear hub

Bob,

I finally got around to it. I purchased an adjustable spanner wrench from a bicycle shop and the pins fit the freewheel perfect. I purchased a $13 benzomatic torch at Wal-mart and heated the freewheel for 3+ minutes, and finally, I was able to turn the freewheel with the spanner wrench. I bought a new freewheel and I'm putting this one with anti-seize!

As others might have feared, I had no issues with the aluminum hub getting close to melting. You would really have to try hard to melt the aluminum.

Thanks for the suggestion. Sorry no photos, I dont have a digital camera...

ArcticFox
ArcticFox's picture
Offline
Last seen: 15 years 7 months ago
Joined: Tuesday, June 12, 2007 - 14:08
Points: 1091
Re: How do I remove the freewheel from the rear hub

I wish I would have thought of using a torch. I ended up drilling a hole into the bearing's racetrack and driving a long screw into it to jam it all up. There's definitely no free wheeling it now! :)

<table border="0" style="border:1px solid #999999; padding:10px;"><tr><td>
<a href="http://www.BaseStationZero.com">[img]http://visforvoltage.org/files/u419...
[size=1][color=black]www.[/color][color=#337799]BaseStationZero[/color][co

Deafscooter
Deafscooter's picture
Offline
Last seen: 16 years 9 months ago
Joined: Friday, November 17, 2006 - 17:39
Points: 519
Re: How do I remove the freewheel from the rear hub

I know how to remove the hub without the notch

SIMPLE=> is Welding to Glue then remove the Sprocket off from wheel
then throw it to Trash then purchase replacement Sprocket with notch

Craig Uyeda
Deafscooter

deafscooter

Log in or register to post comments


Who's online

There are currently 0 users online.

Who's new

  • eric01
  • Norberto
  • sarim
  • Edd
  • OlaOst

Support V is for Voltage