Vectrix Encoder where to source

7 posts / 0 new
Last post
antiscab
Offline
Last seen: 10 months 1 day ago
Joined: Saturday, July 7, 2007 - 23:55
Points: 1686
Vectrix Encoder where to source

Hi All,

Today I used my last spare encoder to fix a customer bike whose enocder had suffered from water ingress

I went to order a replacement from vectrix parts, but see the website is down.
Same too for dugas engineering

Has anyone identified what encoder is used in the Vectrix, and where to order from?

X Vectrix
Offline
Last seen: 1 year 3 weeks ago
Joined: Tuesday, August 4, 2009 - 05:20
Points: 298
Re: Vectrix Encoder where to source

I still have them. I took them off e-Bay b/c I was constantly getting emails from a guy in Europe who wanted to pay half price. $225 each. Let me know if you want one and I will send PayPal info.

BTW, these were custom made for Vectrix. Before going bankrupt, we were informed that they would no longer be supplying them when stock ran out. I developed an alternative but...well you know the story.

R
R's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: Thursday, June 18, 2009 - 09:46
Points: 1768
Re: Vectrix Encoder where to source

Hi, I have some spares, but I'd prefer to keep them until a replacement hardware is ready. I know Fran is working on a replacement, but it will take time. If I were you, I'd wait to see where vectrixparts hardware warehouse ends...

Syle3
Offline
Last seen: 3 months 2 weeks ago
Joined: Monday, December 19, 2016 - 05:26
Points: 21
Re: Vectrix Encoder where to source

Hello everybody,

I'm sorry I can't help, but, You may help me.

I'm looking for a special tool ( the left part in the picture or both parts ) https://www.dropbox.com/s/wkymjnq20qziuxe/calibration%20tool.jpg?dl=0

I bought the rignt part from Vectrix spare shop a few weeks ago. The site is down again at this time but I informed former Vectrix staff about this.

a plan with precise dimentions to make one may help.

antiscab
Offline
Last seen: 10 months 1 day ago
Joined: Saturday, July 7, 2007 - 23:55
Points: 1686
Re: Vectrix Encoder where to source

Thanks X Vectrix, I found an additional encoder disk in a motor in a wreck in my shed, so I'm back to one spare.
I'll keep in mind that you have more available, though it's likely not worth me hoarding spares (yet)

Daily Ride:
2007 Vectrix, modified with 42 x Thundersky 60Ah in July 2010. Done 194'000km

R
R's picture
Offline
Last seen: 2 months 3 weeks ago
Joined: Thursday, June 18, 2009 - 09:46
Points: 1768
Re: Vectrix Encoder where to source

The spanish group 3d Printed these calibration items. Send me PM and i'll try to help you.

Syle3
Offline
Last seen: 3 months 2 weeks ago
Joined: Monday, December 19, 2016 - 05:26
Points: 21
Re: Vectrix Encoder where to source

Hello everybody.

I found this. It may help. Encoders maker. I didn't contact them for quote.

https://www.rls.si/eng/?gclid=Cj0KCQiA09eQBhCxARIsAAYRiymUxBhV_oanRralKvD9fIoKseGiqqap2nFtFqyOWnKguyvzkEy4EbUaArTjEALw_wcB

Log in or register to post comments

Buy Ecotric bikes, get free accessories!


Who's online

There are currently 0 users online.

Who's new

  • xovacharging
  • stuuno
  • marce002
  • Heiwarsot
  • headsupcorporation

Support V is for Voltage