Controller replacement help needed

4 posts / 0 new
Last post
davovinch
davovinch's picture
Offline
Last seen: 17 years 2 months ago
Joined: Wednesday, August 29, 2007 - 17:02
Points: 8
Controller replacement help needed

I bought a New Hope kit on ebay that suffers from a poorly designed controller.Seller is no help,I've bought 2 controllers so far the mosfets short out and destroy the lo v ic's. The motor was advertised as 500 watts the v is 48 no specs are available on the controller. I'm thinking a crystalyte 48v 20 amp might be a good choice. Motor wiring is 3 power leads, 3 sensor leads, 5v hot and ground. The throttle is wired 5v hot, ground and .5 to 4.5v 0n the sensor wire closed to wide open. Any thoughts out there? Thanks in advance.

Stleride
Stleride's picture
Offline
Last seen: 17 years 2 months ago
Joined: Sunday, December 24, 2006 - 19:31
Points: 168
Re: Controller replacement help needed

`davovinch,
Welcome to our V is for Voltage Community, I'm sure several of your very knowledgeable fellow Community Members will have some advice for you shortly.
Please keep us updated.

Stleride
Moderator Team Captain

Moderators are dedicated volunteer V Team members who help keep your V Forums running smoothly and provide Forum Support.

`

Stleride
Moderator Team Captain

Moderators are members of our very dedicated community volunteer <a href="http://visforvoltage.net/page/106-our-community-volunteers">V Team</a> who help keep our <a href="http://visforvoltage.net/page/251-poli

davovinch
davovinch's picture
Offline
Last seen: 17 years 2 months ago
Joined: Wednesday, August 29, 2007 - 17:02
Points: 8
Re: Controller replacement help needed

Well it seems that no one was able to rise to the occasion. I did figure out how to apply a solid quality Crystalyte controller to just about any Chinese hub motor. If anyone needs help with this type of problem email me through the member list and I will be glad to help.
Davovinch

David Vinch

Gman
Gman's picture
Offline
Last seen: 16 years 10 months ago
Joined: Monday, November 20, 2006 - 23:24
Points: 1720
Re: Controller replacement help needed

` :( :( :(
davovinch,
Sorry about that, I have no knowledge on any of those items, I did do some research on the New Hope kit and didn't understand any of it.
I'm sure this just fell through the crack some how. Control systems doesn't get a lot of traffic, were you using it on a E Bike?
Well thanks for offering to help others.

Peace Out,
Gman

What is your vision for the future our growing community?

Peace Out, <img src="http://tinyurl.com/ysafbn">
Gman

Log in or register to post comments

Buy Ecotric bikes, get free accessories!


Who's online

There are currently 0 users online.

Who's new

  • eric01
  • Norberto
  • sarim
  • Edd
  • OlaOst

Support V is for Voltage