Blogs

reikiman's picture

My upcoming new project

For most of the year I've been pondering the usefulness of different types of vehicles. I have a 10 mile commute, a range that's pretty easily bikeable, especially with an electric assist. I see my waistline and I think I'd like to be skinnier, and I like riding a bicycle, etc. Which makes me think if I put all these ideas together, I'd like to be biking to work regularly rather than riding. Sure, riding a motorcycle you're out in the open air etc, but it's not much in the way of exercise.

before comments
jdh2550_1's picture

XM-2000 by JDH: A simple battery compartment modification

Mod: Moving the battery around
Benefit: More under seat storage
Cost: $0*
Complexity: Easy

* cost based on materials I had to hand

Topics: 
before comments
davew's picture

Circles

before comments
jdh2550_1's picture

XM2000 by JDH: Scooting around Ann Arbor

Well I had planned to have done some of the mods by now - alas "real life" (tm) got in the way. So, instead here are some photos of me scooting around Ann Arbor (OK, I'm not sure anyone else wants to see these - but it's my blog, right ;) )

Based on a post from GMan from an email he received:

Topics: 
before comments
echuckj5's picture

Cheetah

Forks came,
Five inches taller than either of my stock forks

100_0380.jpg

Topics: 
before comments
echuckj5's picture

simple wiring help

aa_paint__brake_tail_and_turn.jpg

I have most of the wiring figured out for my rear lights. Now, how do I wire the brake lights, when I apply my brakes will my turn signal not flash. For me the easy way would be to just run a third light for my brake light. It looks to me that automotive flasher, has 2 prongs, should be run like this, does it over ride the brake signal and keep just one of the lights flashing, will both lights flash if I hit the brakes?

before comments
echuckj5's picture

"Cheetah" wheel, bearings and soldering

The Good

I called my local bike shop, "The Bike Shop" in Richardson TX this morning, told my salesman Greg that I needed a wheel for my new fork, Greg used to be not so enthusiastic when I showed up or called, he's coming around now. Greg just called me back, great news, rim, spokes and a 20mm through hub, $100.00 smackeroos. Built! ha, cheaper than the internet.

The Bad

before comments
echuckj5's picture

The "Cheetah"

I took this picture about a month ago, I have and am spending some serious money on this machine. After taking this picture my charger went out.

100_0353_0.jpg

The charger was a soniel model 2409, Andrew here on the forum is getting it, sorry Andrew, UPS passes my shop by if I am not there, post office is across the street here, will probably send it this evening.

588_chg_schauer_24v_7a_1_lg.jpg

before comments before comments
jdh2550_1's picture

XM-2000 by JDH: 100+ miles and my first electrical fire...

Ride Report - the first 100 miles

OK - so I've ridden my XM-2000 about 100+ miles now. I've taken it to work and back (24 mile round trip) a couple of times. It cruises fine at 40mph - but it takes too long to get there. Up hills it drops to around 30mph. The stretches of 50mph limit road are where I start holding up traffic - oh well! I always ride close to the side and don't much mind if people squeeze past.

Topics: 
before comments

Pages

Buy Ecotric bikes, get free accessories!

Subscribe to RSS - blogs


Who's online

There are currently 0 users online.

Who's new

  • Skyhawk 57
  • wild4
  • justinsmith07
  • Juli76
  • xovacharging

Support V is for Voltage